移动式滚筒筛选金设备出口菲律宾

　　移动式滚筒筛选金设备出口菲律宾，工作流程如下：原料通过工程车辆送入进料斗，首先筛分出较大不合格的物料，细料通过高压水反冲均匀进入多铰刀链条驱动式滚筒筛内， 通过滚筒筛内多条铰刀把成团粘泥绞散，中央供水管道永远朝向下部对物料进行充分冲洗将粘泥冲走，然后筛分为 6mm 以上与 6mm 以下两种规格。其中 6mm 以上物料排入一条固定溜槽进行大颗粒矿物提取回收后，废料排入废料区域，回收率达到 90% 以上；
　　6mm 以下物料排入料箱内通过一台沙泵打入卧式全自动排矿离心机内进行精选(沙泵供料能够保证进料浓度在 30%以下，并 且对物料进行二次清洗，极大提高回收率)，小于 6mm 以下的矿物会在卧式自动排放离心机通过 PLC 电脑控制下自动排入精料 箱内，废料自动排出到废料区域。
　　The raw material into feed hopper by excavator,then swilled by high pressure water into reamers trommel screen and to be making the caly into mixture with water,the central water swilling and take the clay off, it to be classified into 2size＞6mm and ≤ 6mm,the material  ＞6mm into one fixed sluice to get nugget,the scrap get rid into the scrap pool;
The material ≤6mm into horizontal automatic centrifuge concentrator by one set 4inch sand pump which can control the concentration below 30% and also the 2nd washing to mineral efficiently,finally the concentrate automatic discharged and scrap getting
rid into scrap pool.

移动式滚筒筛选金设备出口菲律宾淘金视频